Physical AI

Physical AI in energy operations

AI that works on real energy assets, not just in a demo.

Applied AI for energy operations, from the first awkward question to AI running on real plant.

61%
of CEOs say their boards are rushing AI transformation
6%
of organisations say AI is delivering significant value, worth 5% or more of their operating profit
45%
of test cases where AI-generated code introduced security flaws

AI gets you started. Energy decides whether it works.

With AI, organisations can now build quite a lot on their own. But AI can generate code that looks correct, and even works in some scenarios, without the whole solution being reliable. In energy that gap is costly, because the software runs complex energy calculations and controls physical equipment. Sooner or later most projects hit the same walls: architecture, integrations, security and scaling.

If you haven't started yet, the question is simpler and just as hard: where would AI actually pay off in your operation, and where do you begin? We understand not only the software, but how these systems work and what problems you're trying to solve.

“Accurate enough to trust with a real asset; fast enough to run on a box bolted to the wall of a plant room.”

Physical AI in energy

Physical AI is AI that senses, decides and acts in the physical world through real equipment, rather than only producing text or images. It covers the whole loop: sensors, cameras and radar that perceive; models at the edge and in the cloud that decide; and controllers, plant, vehicles and robots that act. In energy, that loop runs through generation and storage, grid connections, EV charging, industrial plant and buildings, and that's where we work every day. It also raises the stakes: when AI acts on equipment, it has to fail safe, and you need to see why it did what it did.

Nobody's data is as tidy as the slide deck suggests

Most sites have at least one meter that drifts and a spreadsheet only one person understands. That's usually where AI projects stall, and it's a big part of why so many never pay off.

We don't wait for a tidy data platform. We start with what you've got, use AI to infer the gaps, mark every inferred value so nobody mistakes it for a reading, and fit a sensor where a model's best guess isn't good enough.

It's the same thinking behind the patented load disaggregation method our engineers co-invented, which works out when individual fixtures are running from a single circuit signal, accurately enough that customers and utilities sign off the savings.

Wherever you are, we can pick it up from there

Not started yet

Where should we start with AI?

A lot of teams have been told to 'do something with AI' and left to work out what. We'll look at your operation, your assets and your data, and tell you where AI could pay off and where it won't. We discuss your ideas, challenge some assumptions and suggest alternative approaches. Having worked on similar projects before, we bring our own experience and ideas to the conversation.

Book a free AI readiness review →
Built something

Can you take our AI prototype to production?

Maybe someone vibe-coded something clever over a weekend, and it works beautifully right up until it meets live data, a real controller and your IT security team. Or there's a pilot that's been 'nearly ready' for six months. Getting it from there to running on site is the part we do.

Book a free AI readiness review →
Running it for real

How do we connect AI to our equipment?

We connect software with real devices, sensors, meters, chargers and industrial equipment, across different manufacturers and communication protocols. We can take care of deployment, security and ongoing maintenance, or support your existing team with specific technical challenges.

Talk to us →

AI readiness review

An AI readiness assessment for energy operations

A focused look at where AI could pay off in your operation, and whether anything you've already built is field-ready. It starts with a 30-minute call, and you come away knowing what's worth doing first, and what isn't.

Free · 30-minute initial call with an engineer · Written summary within five working days · No obligation

The person you talk to is the person who'd do the work.

What happens next

If it makes sense to go further, we'll suggest a next step that fits what we've found. If it doesn't, we'll say so, and you still keep the summary.

Book a free AI readiness review →
Who it's for
  • You've been asked for an AI plan and want one built around your own assets and data
  • You've got an AI-built prototype that now has to work on live data and real kit
  • You want AI acting on equipment, and you want to know it will fail safe
What you get
  • A shortlist of AI opportunities in your operation, ranked by value and effort
  • A frank view of your data and equipment: what's ready and what's missing
  • If you've built something, a review of its architecture, integrations, security and scaling
  • A clear recommended next step, even if that's "not yet"

From first question to field deployment

AI strategy and use cases

  • Finding where AI will pay off in your operation
  • Data readiness: mapping what you have and inferring what's missing
  • Free AI readiness review for energy operations
  • Challenging assumptions and suggesting alternative approaches
  • Feasibility and business case before you build

Prototype to production

  • Architecture review and redesign
  • Integrations, security and scaling
  • Code review, testing and validation
  • Deployment and ongoing maintenance

Equipment and protocol integration

  • Meters, sensors, chargers and industrial equipment
  • Cameras, radar and environmental sensors
  • SCADA, BMS and IoT integration
  • Modbus, MQTT and OCPP across different manufacturers
  • Edge AI that runs on modest field hardware

AI for energy assets

  • AI-driven predictive maintenance for energy infrastructure
  • Battery storage and dispatch optimisation
  • EV charging management and tariffs
  • Anomaly detection in telemetry and logs
  • Digital twins of plant, sites and buildings
  • Price, demand and generation forecasting

Why energy teams bring us in on AI

We know energy.

EV charging, geothermal, biogas, energy markets, battery storage and optimisation. We understand not only the software, but how these systems work and what problems you're trying to solve.

Software and hardware engineers, one team.

Connecting software to real devices is often more complicated than writing the application, especially across different manufacturers and protocols. We do both.

Safe, explainable and tested.

AI-generated code can look correct and still fail. We review and validate it, benchmark models against the optimal answer and test from bench to field. Our systems fail to a safe state when communications drop, and you can always see why the AI did what it did.

AI tools, plus the experience to use them well.

We use modern AI tools too, combined with our engineering and domain knowledge. We know what tools to use, which approach might work best and what common problems to avoid. That saves a lot of time.

Certified to ISO/IEC 27001, the international standard for information security management.

As much or as little as you need

We don't need to build the whole solution.

Review what you've built

We look at what you already have and tell you straight what's missing before you commit more to it.

Help with a specific challenge

One hard problem solved, such as an integration, a security gap or a calculation you can't trust.

Support your existing team

Our engineers work inside your team, in your tools and repos, following your priorities.

Take on the complete project

We take responsibility end to end, from idea and design to deployment and maintenance.

Whichever you choose, you own 100% of the IP: code, designs and deliverables.

Read how we partner with you →

AI working on real equipment

0.2 ms
to dispatch 72 generators on a Raspberry Pi, within 2.3% of optimal
Patented
load disaggregation from a single circuit signal, co-invented by our engineers (US 10,734,809)
Per-cycle
detection of grid frequency events, dispatching battery banks the instant one is detected
Biogas · Germany

Turning biogas into bigger profits

Prove it before you build: a physics-accurate digital twin proved the case in weeks and won board approval before the build began.

View project →
M&V · USA

Patented load disaggregation

AI accurate enough to bill on: a patented method (US 10,734,809) infers fixture run-times from a single circuit signal.

View project →
Battery storage · UK

Battery management for grid support

AI for battery management, acting on equipment: edge devices detect grid frequency events on a per-cycle basis and dispatch battery banks the instant one is detected.

View project →
R&D

Wavelet-based dispatch for mixed fleets

Runs on modest hardware: dispatches 72 generators in 0.2 ms on a Raspberry Pi, within 2.3% of optimal.

View project →

The same engineering, beyond energy

Energy is our focus, but the same work applies anywhere software meets real equipment, such as buildings, transport and infrastructure.

Buildings · Ireland

Indoor positioning systems

Custom Bluetooth 5.1 CTE tags, anchors and a positioning engine creating a real-time digital twin of modular building interiors, funded under EU Horizon Europe (TARGET-X).

View project →
Transport · National roads programme

Intelligent roadside safety system

Detection at the roadside from radar, CCTV, weather stations and in-road sensors, driving automatic warnings along the whole route without waiting on a control room.

View project →

From our insights

Frequently asked questions

What is physical AI?

Physical AI is AI that senses, decides and acts in the physical world through real equipment, rather than only producing text or images. Robots, drones and autonomous vehicles are the best-known examples, but it also includes sensor networks, digital twins, edge devices and control systems. In energy, it means AI running on generation and storage assets, grid connections, EV charging, industrial plant and buildings. Our physical AI services cover design, build, integration and ongoing support.

How is physical AI different from generative and agentic AI?

Generative AI creates content such as text, images or code. Agentic AI plans and carries out tasks across software. Physical AI senses and acts through real equipment, which is why it has to fail safe. Energy projects often combine them: an agent might draft a dispatch plan, and physical AI carries it out on a battery.

How do you keep AI safe when it controls equipment?

By designing for failure from the start. Our systems fail to a safe state when communications drop, our models are benchmarked against the optimal answer, and we test from bench to field before anything goes live. You can always see why the AI did what it did.

Where should an energy company start with AI?

Start with the problem you're trying to solve, not the tool. Tell us about your operation and we'll discuss your ideas, challenge some assumptions and suggest where AI could actually pay off. Our free AI readiness review is built for exactly this.

Does our data need to be AI-ready before we start?

No. But you do need to know where the gaps are. We map what you have, let AI fill or flag what's missing, check the results against real readings, and tell you honestly when a new sensor or a fixed process would do more good than another model.

How is AI used in the energy sector?

Applied AI in energy dispatches batteries, manages EV charging, forecasts prices and demand, detects anomalies in telemetry and runs assets like biogas plants more profitably. We've built systems for each of these, across Ireland, the UK, Europe and the US.

Can AI do predictive maintenance on energy assets?

Yes, shaped to what your assets and data need. It's already one of the most common uses: 53% of utilities use AI for predictive maintenance and asset monitoring (L.E.K. Consulting, 2025 Global Energy Study). We connect to your meters, SCADA and equipment, watch the telemetry for anomalies and flag problems early, so maintenance happens before a fault does.

Can you take our AI prototype to production?

Yes. Prototypes built with AI tools often struggle with architecture, integrations, security or scaling once they meet real equipment, and we help turn them into reliable products.

Is AI-generated code secure and reliable?

Not automatically. AI can generate code that looks correct and even works in some scenarios, but that doesn't mean the whole solution is reliable. That matters most when the code runs energy calculations or controls physical equipment.

Can you connect AI to our SCADA, meters or chargers?

Yes. We connect software with real devices, sensors, meters, chargers and industrial equipment, across different manufacturers and protocols such as Modbus, MQTT and OCPP.

Do you use AI tools yourselves?

Yes, combined with our engineering and domain knowledge. We know which tools to use, which approach might work best and what common problems to avoid, which saves a lot of time compared to figuring it all out alone.

Do you work outside energy?

Yes. Energy is our focus, but we apply the same engineering anywhere software meets real equipment, including building interiors and roadside safety systems.

Get started

Not sure where AI fits yet? That's a good place to start.

Tell us what you're working on, from a first idea to a prototype that's stuck, and we'll tell you honestly what we think.

Book a free AI readiness review →Talk to us →